So, things are looking like they need to be updated, and you’re feeling like it’s about time to just go ahead and do it already. 

Maybe you’ve been waiting and procrastinating on it for a while now because you dread what it will cost you. 

Or perhaps you just don’t want to deal with the hassle. 

Whatever the case may be, we’ve got good news for you: There’s a high likelihood that you don’t actually need to go through all that. 

And that’s because bathroom floor tile refinishing has some pretty huge advantages over a full replacement. 

What sorts of advantages? 

Well, for starters, …

Bathroom Floor Tile Refinishing Costs Less

Unsurprisingly, the project with fewer moving parts and lower labor and material requirements costs considerably less. 

Yes, if your bathroom is in need of an upgrade or even just a restoration back to its old glory, you can make that happen without spending as much money as you would to have everything removed and replaced. 

After all, do you know how much new tiles cost? 

If your bathroom needs a refresh or a clean, updated look, refinishing can achieve that without turning the project into a full remodel.

Because the existing tile stays in place, the cost isn’t tied to the price of new tile, grout, or additional building materials.

You’re also not paying for multiple trades or extended labor timelines, which can quickly drive up the total cost of a replacement project.

Sure, it depends on what kind they are and where you get them, but it doesn’t even matter in the case of bathroom floor tile refinishing since you’ll be keeping the tiles you already have.

For many homeowners, refinishing offers the best balance between results and budget.

You get a floor that looks renewed and well cared for, without committing to the higher upfront costs.

Refinishing Takes Less Time Than Full Tile Replacement

The reason it costs less is the same reason it takes less time: There simply isn’t as much to do. 

With replacement, every step takes time such as removing the old tile, preparing the subfloor, installing new tile, grouting, and allowing everything to set properly.

Each of these steps requires skilled labor and coordination, which can stretch a project over several days or even weeks.

If you decide to replace everything, you’ll need to remove what’s already there, prep the area for installing the new tile, and do everything else involved in a new installation. 

Every step in that process takes time and requires a person (or people) to do it. 

We don’t want to make replacement sound like a crazy undertaking, because you sometimes do need to replace everything when the tiles are too damaged or have some other problem. 

Refinishing, on the other hand, skips almost all of that.

The existing tiles stay in place, so the work mainly involves cleaning, minor repairs, and applying a new coating.

For most bathrooms, a professional can complete refinishing in a single day, saving you not only time but also the disruption that comes with a full replacement.

How Long Bathroom Floor Tile Refinishing Can Last

The lifespan of a refinished bathroom floor largely depends on the quality of the existing tiles.

Refinishing doesn’t replace the tiles themselves.

It restores their surface, so if the underlying tile is already damaged or low quality, the results won’t last as long.

If your current tiles are thin, brittle, or starting to crack, a full replacement might be the better investment.

Refinishing tiles that are already deteriorating won’t prevent them from breaking or crumbling, and you could be back at square one within a year.

It won’t make much sense to refinish everything if it’s just going to start cracking and crumbling within a year. 

On the other hand, if they are of great quality and will last for decades as long as they don’t get damaged, then why not keep them? 

The process can give them a like new surface, extending their life while preserving your investment.

Good materials are getting harder to come by these days, so it’s inadvisable to throw good things out if you don’t have to. 

Just remember to treat your tiles well so that they last as long as possible. 

Less Disruption Compared To Replacing Bathroom Floor Tile

One of the biggest advantages of refinishing is how little it disrupts your daily routine.

Unlike a full replacement, which requires tearing out floors, shower walls, or other tiled surfaces, refinishing focuses on the tiles already in place.

Since you don’t have to tear up the whole area for bathroom floor tile refinishing, it tends to get done a lot faster than a complete replacement. 

This applies not just to floor tile.

Shower floors, backsplashes, and accent tiles can be refinished as well, restoring the appearance without removal or reinstalling.

Because the process is mostly surface level, the work is far less intrusive and can often be completed with minimal planning on your part.

Whether it’s the main floor, the shower, or smaller tiled areas, refinishing lets you continue using your bathroom while the work is underway.

Overall, it’s a cleaner, quicker, and more convenient way to refresh your bathroom compared to a full replacement.

Keep The Look Of Your Existing Bathroom Floor Tile

This one matters a lot to many people, especially those who really love their bathrooms and have lived in their homes for a long time. 

For many homeowners, a bathroom isn’t just a functional space, it’s part of the home’s personality.

Older bathrooms, in particular, often have details, materials, and layouts that give them a unique character that’s hard to replicate.

Refinishing allows you to preserve that individuality while still making the surfaces look fresh and clean.

If you’re one of those people who’ve gotten used to the way things are in your bathroom, and you don’t want to see it change entirely, then bathroom floor tile refinishing may be right for you. 

It’s possible to preserve your bathroom’s overall aesthetic while also making everything look nice and new. 

If you’ve got something good that’s done you right for years and shows no signs of stopping, you should definitely consider holding on to it. 

And as we mentioned a minute ago, the market is currently being flooded with cheap but low quality quick builds, so good materials and tiles are worth preserving if you’ve got them.

Achieving A Fresh Look Without Tearing Everything Out

In summary, if you want everything to look just as clean and crisp as if you had redone it all, then bathroom floor tile refinishing is likely something you should consider. 

This same logic also applies to other parts of your bathroom.

Aside from the fact that you’ll be keeping your current tiles, your floor will look brand new. 

And the only reason you’ll know it’s the old tiles is that you saw them before the refinishing happened. 

But in most other ways, from resistance to mold and mildew to that dazzling new tile shine, it will appear and function as though you got a whole new bathroom floor. 

Unless your tiles are damaged beyond saving or repair, there’s really no reason not to do it.